How to use KiCad with PyOPUS
============================
KiCad is a software package for drawing circuit schematics and designing PCBs. 
It can be used as a schematic editor for PyOPUS. This tutorial is not a 
generic KiCad tutorial on drawing schematics. You should first learn to use 
the KiCad schematic editor (eeschema) and then start reading this tutorial. 

Currently a KiCad schematic editor plugin is available for generating 
SpiceOpus netlists. In the future other output formats will also be supported. 

Note that in KiCad 6 schematic files have the .kicad_sch extension. 
This tutorial was written for KiCad 5. So if you are using KiCad 6, 
whenever you encounter .sch in this tutorial, note that the currect extension 
should be .kicad_sch. All demos are available in V5 format (.sch) and V6 format 
(.kicad_sch). 

Before you start using KiCad you need to set it up. See :ref:`kicadsetup`.

.. toctree::
   :maxdepth: 2
   
   tutorial.netlister.kicad.library.rst
   tutorial.netlister.kicad.fields.rst
   tutorial.netlister.kicad.json.rst
   tutorial.netlister.kicad.subcktmos.rst
   tutorial.netlister.kicad.mosmmpar.rst